INSTALLATION/Refurbishment
MCI technicians carry out Ex and industrial installations and refurbishment both in offshore and onshore environments. With extensive knowledge and experience, our fully trained CompEx approved electrical field engineers provide comprehensive hazardous area installations, inspections and surveys in accordance with BS EN 60079:17.
Recent projects include lighting upgrades, tray and ladder containment, Lifeboat installations, camera systems, fibre optics, PLCs and control panel upgrades and installations (including manufacture and panel builds).
MCI, a leader in electrical systems, has carried out works in the following regions: North Sea, Norway, Europe, Asia, Far East, Middle East and the USA.
Our clients also benefit from additional on and offsite services including:
-
Switchboard and Motor Control Centres
-
Distribution Boards and Systems
-
Circuit Breaker Primary Current Injection
-
Protection Relay Testing
-
Ex workshop Container Installations
-
Motor and Pump Installations
-
MCC Cubicle Refurbishment
-
MDU Design, Build and Refurbishment
MAINTENANCE AND FAULT FINDING
MCI’s skilled engineers offer unrivalled electrical fault finding and maintenance solutions. Our vast experience helps maintain your Ex and industrial electrical plant and equipment to an effective and operational standard. Services include:
-
Control Systems and Starters (Including VSD and Soft Starts)
-
Process Plant and Equipment
-
MCC and Switchboard Routine Inspections
-
Pumps and Associated Control Equipment
-
Lighting and Power Circuits
-
General Maintenance and Repairs
MCI provides services for the installation and refurbishment of new and existing plant. Our BS EN ISO 9001 Quality Management System provides the foundation of our installation and refurbishment processes. If you are looking for an installation or refurbishment of a new or existing system then MCI can cater for your requirements.
Contact us now at +44 (0) 1224 772211 for a free quotation. Alternatively contact our Engineering & Manufacturing team at ron.anderson@mci-electro.co.uk, craig.chalmers@mci-electro.co.uk, paul.robb@mci-electro.co.uk who will be delighted to help.
440V 3ph Industrial Control Panel Shown after Installation. The units were installed to control various equipment on an offshore installation. Control Panel manufactured and installed By MCI Electrotechnics.
Hazardous Area Installation on Skid. The skid was equipped with Exd motor and pump system and all associated control panels. Control Panel manufactured and installed By MCI Electrotechnics.
Transformer Cabling from Distribution System which was installed in a purpose built A60 Container for use to supply 440V 3ph and supplies for offshore requirements. Control System manufactured and installed By MCI Electrotechnics.
Refurbishment/Testing of Client Systems. This Included checking of all components and replacing where required. Carrying out Injection Testing of MCB’s and RCD’s. Removal of MDU and Components to blast and paint Frame. Reassemble and carry out F.A.T. with Client present. Refurbishment carried By MCI Electrotechnics.
Refurbishment Testing of Client Systems. This Included checking of all Components and replacing where required. Carrying out Injection Testing of MCB’s and RCD’s. Removal of MDU and Components to blast and paint Frame. Reassemble and Carry out F.A.T. with Client present. Refurbishment carried By MCI Electrotechnics.
Refurbishment Testing of Client Systems. This Included checking of all components and replacing where required. Carrying out Injection Testing of MCB’s and RCD’s. Removal of MDU and Components to Blast and Paint Frame. Reassemble and Carry out F.A.T. with Client present. Refurbishment carried By MCI Electrotechnics.
stainless steel panels
MCI acknowledges that the challenges of today's industry requires equipment manufactured to the highest possible quality. Therefore, stainless steel is often the preferred material of choice. MCI has a stock holding of numerous sizes of standard panels in grades 304 and 316 stainless steel.
MCI also fabricates “specials” in stainless steel if the type and sizes are not available from regular suppliers. Some examples of these stainless steel panels include:
-
Distribution Panels
-
Fire Pump Control Panels
-
Drillers Console
-
Starter Control Panels
-
MDU Systems
-
Panel Mounting Frames and Housings
MCI is a leading manufacturer of bespoke stainless steel panels out with standard sizes, constructed in-house to exact specification. Our BS EN ISO 9001 Quality Management System provides the foundation of our manufacturing processes. If you are looking for a standard product or bespoke system built for your particular local or global project, then MCI can cater for your requirements.
Contact us now at +44 (0) 1224 772211 for a free quotation. Alternatively contact our Engineering & Manufacturing team at
ron.anderson@mci-electro.co.uk, craig.chalmers@mci-electro.co.uk, paul.robb@mci-electro.co.uk who will be delighted to help specify your Control System enquiry.
Wall mounting Alarm / Control Panel Showing External Controls, pushbuttons, indicating lamps, sounder and labelling. Alarm Panel manufactured By MCI Electrotechnics.
Stainless Steel bespoke Alarm Panel showing internal control components. The panel is wall mounting and configured for bottom entry. Control Panel manufactured By MCI Electrotechnics.
Wall mounting Alarm / Control Panel Showing External Controls, pushbuttons, indicating lamps, sounder and labelling. Alarm Panel manufactured By MCI Electrotechnics.
circuit breaker retrofit
MCI specialises in installation, maintenance, refurbishment, current injection, circuit breaker retrofits and surveys on all types of electrical equipment and control systems.
CIRCUIT BREAKER Installation and Maintenance
MCI offers a retrofit kit for the installation of new Schneider Merlin Gerin Masterpact NT or NW circuit breakers to replace existing obsolete breakers regardless of whether they are ABB Sace Novomax, Siemens 3WN, Terasaki, AEG and Melin Gerin Selpac, DA or Compact.
The obsolete breakers and the chassis can be removed and replaced with the new Air Circuit Breaker and special chassis. There is no need to change the bus bars as the chassis is a specially adapted Masterpact chassis which is custom made for the existing configuration. This means there is no change to the existing bus bars, which saves considerable time for the installation.
MCI offers a Plug and Play solution for the installation of new Schneider Merlin Gerin Masterpact NW circuit breaker to replace the existing obsolete Merlin Gerin MW Masterpact range of circuit breaker. This allows change out of the breaker using the existing chassis with no need for isolation.
MCI provides a solution to retrofit existing obsolete Fixed Moulded Case Circuit Breakers up to 2500A. These are replaced with the Schneider NT/ MW range of withdrawable Air Circuit Breakers, which allows removal of the new ACB for maintenance and current injection testing without isolation of the main Switchboard.
MCI offers a service to carry out a survey to establish all the requirements for replacing obsolete breakers.
In addition, MCI carries out primary current injection testing on all types of MCB’s, MCCB’s and ACB’s. This can be completed in house or at client locations onshore or offshore. We have two purpose built stainless steel enclosures incorporating all test instruments required, including Megger Oden AT Primary Injection Sets.
MCI offer a service for the installation and replacement of existing plant. Our BS EN ISO 9001 Quality Management System provides the foundation of our installation and replacement process. If you are looking for a standard or bespoke system, refurbished for your particular needs, then MCI can cater for all your requirements.
Contact us now at +44 (0) 1224 772211 for a free quotation. Alternatively contact our Engineering & Manufacturing team directly at ron.anderson@mci-electro.co.uk, craig.chalmers@mci-electro.co.uk, paul.robb@mci-electro.co.uk.
ACB to Replace Existing out of Life Breaker Showing Special Frame and Rear Copper Transition Bars to suit Existing System. The Retrofit Breaker uses the Cubicle Fixing Holes and connects on to the Existing Bus bars with no Changes, keeping same Fault Level as the Switchboard. Retrofit carried out By MCI Electrotechnics.
Bespoke Feeder Control System Showing Bus Bar Incomer Turn Points to allow connection of the field cables System manufactured By MCI Electrotechnics.
ACB to Replace Existing out of Life Breaker Showing Special Frame and Rear Copper Transition Bars to suit Existing System. The Retrofit Breaker uses the cubicle fixing holes and connects on to the existing Bus bars with no changes, keeping same Fault Level as the existing Switchboard. Retrofit carried out By MCI Electrotechnics.
EQUIPMENT HIRE
MCI hire various tools and equipment associated with the electrical industry. Hydraulic tools include but not limited to: crimping tools (hand & foot pump type) for Metric and American MCM cables, Cable Cutters up to 140mm diameter and hole punches with round and square dies. Other equipment includes Cable Jacks 3 & 6 Ton and ratchet cutters.
Some further examples of equipment include:
-
Hydraulic Crimpers
-
Hydraulic Cable Cutter
-
Hydraulic Punch
-
MDU Distribution Units
-
Power Distribution Containers
-
Small Power Distribution Units
Our BS EN ISO 9001 Quality Management System provides the foundation of our equipment hire services.
Contact us now at +44 (0) 1224 772211 for a free quotation. Alternatively contact our Engineering & Manufacturing team directly at ron.anderson@mci-electro.co.uk, craig.chalmers@mci-electro.co.uk, paul.robb@mci-electro.co.uk.
Penn-Union TDY-U Die-less crimper suitable for MCM cable lugs. MCI Electrotechnics Aberdeen.
Cembre Hydraulic Cable Cutter P600-WZ-KV with foot pump separate cutting head. MCI Electrotechnics Aberdeen.
Cembre hand held Hydraulic Crimper and with dies suitable up to 400mm. MCI Electrotechnics Aberdeen.
16 Amp Power Distribution Spider Unit suitable for use in Zone 1 CAT 2 Hazardous Areas on-shore or offshore. SIRA 13ATEX1311X, EN60079-0; EN 60079-1; EN 60079-7, EN 60079-31. Gas and Dust certified Exde IIC T6 Gb; Ex tb IIIC T85 110 or 240 Volts 50/60Hz. Stainless Steel Protection Frame with built in cable reel. CEAG socket outlets. Available with BS6883 marine grade extension cables and Mobile Distribution Units. MCI Electrotechnics Aberdeen.
Test Container for Site Commissioning Purposes, Distribution and Various Starter Ratings. Also shown are the 440/110V MDU Units System Container kitted out by MCI Electrotechnics.
Stack able for safe and easy transportation 16 Amp Power Distribution Spider Units suitable for operation within Zone 1 CAT 2 Hazardous Areas on-shore or offshore. SIRA 13ATEX1311X, EN60079-0; EN 60079-1; EN 60079-7, EN 60079-31. Gas and Dust certified Exde IIC T6 Gb; Ex tb IIIC T85 110 & 240 Volts 50/60Hz. Stainless Steel Protection Frame, built in cable reel. CEAG socket outlets. Available with BS6883 marine grade extension cables and Mobile Distribution Units. MCI Electrotechnics Aberdeen.
